Edimax-technology IC-3005Wn Bedienungsanleitung

1

10 Name Description Tripod Connector Connects to standard tripod / camera wall holder Power Connector Connects t

100 Step 4: Configuration for iPhone. (1) Make sure Internet connection is ok with iPhone and click “Safari” (2) Enter the IP address of your ro

101 (3) Enter user name & password for the Edimax IP camera. By default, user name is admin and password is 1234 (4) Let‟s add the 1st IP ca

102 (5) Click “Add” when finishing the following configuration: (6) Click “Add” when finishing the following configuration for the 2nd IP camera

103 (7) Configuration is complete. You could see the live video of the 2nd IP camera.

104 Chapter V: Appendix 5.1 Troubleshooting If the IP camera is not working properly, before you contact the dealer of purchase for help, please ch

105 c. If you‟re connecting this camera from Internet, it could be caused by a slow Internet connection, and it‟s not a problem caused by camera. H

106 to send image by Email or FTP, but nothing is received not blocked by any anti-spam mechanism. b. Please make sure you have enough permission fo

107 5.2 Obtain a free Dyndns account If your ISP is issuing dynamic (non-static) IP address to you and you can‟t connect to your IP camera when you‟

108 3. Click „Create an Account‟ in pop-up menu. 4. Fill all fields appear in this menu, and click „Create Account‟ button to create a new accou

109 5. When you see this image, you‟ll receive an e-mail confirmation at the e-mail box you registered with dyndns.org. 6. Check your e-mail box

11 1.5 Camera Installation 1. Unpack your Edimax IP Camera from its packaging and ensure that all the items listed in Chapter 1 are there. 2. Con

110 7. When you see „Account Confirmed‟ webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click „Create a dyn

111 9. In this page: Input the hostname of your choice in „Hostname‟ field, Select a domain name in dropdown menu, Select „Host with IP address‟ fo

112 11. Click „Next‟ to continue. 12. Click „Activate Services‟ to continue. 13. When you see this message, indicates your free dyndns.org hostn

113 5.3 Use this IPCAM with a router or firewall If this IPCAM is not directly connected to Internet (behind router or firewall), you‟ll need to set

114 3. Enable Dynamic DNS function, select „DynDNS‟ as service provider, and fill the information you obtained from Dyndns.org into Domain name, Acc

115 IP CAM web configuration and view live image: 80 AV Control Port: 4321 RTSP: 554 and 50000 to 60000 Please note that if you changed the port num

116

12 1.6 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this

13 2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟.

14 4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟.

15 5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can

16 1.7 Log Onto Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type

17 After logged on, you should see the following messages at the top of Internet Explorer: If not, please go to section 1.8.1 „Install ActiveX‟.

18 You should be able to see the image from camera now: Note: If you see one of these messages (or both): Your computer may no

19 1.7.1 Install ActiveX Most of browsers support Microsoft ActiveX, but if ActiveX is not present on your computer, you need to install it before y

2 ErP Announcement Product: Internet Camera (IP Camera) Purpose: 24 hour surveillance and transfer of footage for safety and health reasons as inten

20 Press „Next‟ to start installation; press „Next‟ button when you‟re prompted, until installation is complete:

21 Press „Finish‟ when you see this message. Now please go back to last section to install IP camera plugin.

22 Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and th

23 The descriptions of every setting in this menu will be given below: Item Description Video Format Specifies video encoding format. You can choose

24 To exit digital zoom setting, press button. Fit to Window Click this button and captured image will fit to window size. *Note: If you‟re not

25 2.1.1 About This function will provide you with the version number of current IP camera plugin, which is useful when you need online support. To

26 2.2 LAN Settings All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to ch

27 The descriptions of every setting in this menu will be given below: Item Description Network Type This camera can obtain the IP address from DHCP

28 2.2.2 RTSP RTSP (Real-Time Streaming Protocol) allows you to view live video captured by IP camera. You can set RTSP related settings here. Th

29 2.2.3 PPPoE Enable PPPoE Select „Enable‟ to activate PPPoE function of this IP camera, select „Disable‟ to disable it. User Name Input the PPPo

3 Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

30 2.2.4 Dynamic DNS If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you‟re using when you access the Internet

31 2.2.5 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this IP camera automatically

32 Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet Explorer and log

33 2.2.6 LoginFree You can specify a filename here, and everyone who knows this filename can gain access to the picture captured by the IP camera wi

34 2.3 WLAN Parameters If you wish to use wireless network instead of wired network connection, you have to set wireless LAN parameters here. You

35 The descriptions of every setting in this menu will be given below: Item Description Self PinCode A random 8-digit code will be displayed here. I

36 to connect does not appear, you may have to click „Refresh‟ button for several times until it appears. The descriptions of all fields is listed

37 selected choose to hide it‟s SSID), you have to know it‟s SSID and input it here, or you will not be able to connect it. Channel Select the radio

38 options available here will vary depends on the authentication type you selected above. If an authentication type does not support need encryption

39 only have one WEP key. WEP Key 2 Input the 2nd set of WEP key here. WEP Key 3 Input the 3rd set of WEP key here. WEP Key 4 Input the 4th set of WE

4 Table of Contents Chapter I: Familiar with your Internet IP Camera ... 6 1.1 Package Contents ...

40 2.4 Video You can specify the video and audio parameters of this IP camera here.

41 2.4.1 Dual Mode This IP camera supports two video encoding formats: MPEG4 and MJPEG. You can select the encoding format from one of them. The

42 2.4.2 MPEG4 If you selected „MPEG4‟ as the video encoding format of this IP camera, you can specify the parameters of MPEG4 video encoder here.

43 2.4.3 MJPEG If you selected „MJPEG‟ as the video encoding format of this IP camera, you can specify the parameters of MPEG4 video encoder here.

44 2.5 Email & FTP This IP camera is capable to send an Email or perform FTP upload with captured image, when a motion is detected. This is very

45 2.5.1 Email Settings These settings are used to send the captured picture via Email: The descriptions of every setting in this menu will be giv

46 encryption. If in doubt, ask your ISP or mail server‟s administrator. SMTP Authentication Some SMTP server requires mail senders to be authenticat

47 2.5.2 FTP Settings These settings are used to send the captured picture by FTP: The descriptions of every setting in this menu will be given be

48 found that non-passive mode is not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect

49 2.6 Motion Detection 2.6.1 Basic Settings Motion detection function makes this IP camera become your non-stop guard. You don‟t have to waste all

5 2.10 Account ... 61 2.11 Log……………………………………………………………………

50 interval is too short, you may receive too much unnecessary images, and consumes too much disk storage spaces on Email and / or FTP server. Pre Re

51 2.6.2 Setup Motion Detection Regions If you only want to be notified when motion is detected in certain area of captured image, you can use this

52 The descriptions of every setting in motion detection menu will be given below: Item Description Region1 / Region2 / Region3 Check the box to ena

53 2.7 Schedule You can control FTP / Email image transfer by schedule. Unlike motion detection, the only key to trigger file transfer is time. Y

54 Upload files with filename composed of date / time: When a file is uploaded, it will be named as the date and time when the file is uploaded. Ov

55 2.8 System The system menu allows you to set some system-specific parameters, like password and time setting. You can also upgrade the firmware o

56 2.8.1 Camera Information Camera information allows you to set the name and administrator‟s password of this camera. The descriptions of every

57 2.8.2 Date / Time Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time manu

58 2.8.3 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off. The descript

59 you don‟t want other people know the camera is transferring data. You can click this button again to switch LED lights on again.

6 Chapter I: Familiar with your Internet IP Camera 1.1 Package Contents Thank you for purchasing this IP camera! Before you start to use this IP ca

60 2.9 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information.

61 2.10 Account If you wish to allow other people to view the image captured by this camera, but don‟t want to allow them to modify system settings,

62 The descriptions of every setting in this menu will be given below: Item Description Login Specify the user name here. Please use alphanumerical

63 2.11 Log All activities of this IP camera will be logged, and you and enter „Log‟ menu to view these logs. You can access this menu by clicking

64 2.11 Language Menu This IP camera‟s user interface supports multiple languages. To change language, click „Language‟ dropdown menu: Select a

65 Chapter III: Using Surveillance Software 3-1 Installing IP Camera Surveillance Software The IP camera surveillance software provides various fun

66 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to

67 4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to

68 6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (IP camera surv

69 3-2 Using IP camera surveillance software You can click „IPCam Surveillance Software‟ icon from desktop, quick launch bar, or start menu to start

7 1.2 Basic Introduction Congratulations on buying this Edimax IP Camera! You've chosen well. This IP camera is ideal for all kinds of video su

70 You can put the mouse cursor on a certain component and see its button name, and here‟re detailed descriptions of all buttons: Item Description V

71 Playback Playback a recorded video file. Snapshot Take a snapshot of current camera. Message display Displays all system messages like camera is

72 3-3 Configure IP camera surveillance software 3-3-1 Configure cameras Before you use this IP camera surveillance software, you must configure th

73 3-3-1-1 „Camera‟ tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously:

74 IP* Input the IP address of camera. Username* Input the user name of camera. Web Port* Input the web port of the camera. By default it‟s „80‟. Pas

75 3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by

76 Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please not

77 Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (for

78 3-3-1-3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera.

79 3-3-1-4 Motion Record With this function activated, only motions captured by the camera will be recorded, so you don‟t have to waste hard disk st

8 1.3 Product Highlights No pre-loaded software required - all you need is a browser like Internet Explorer 6 (and above, with plugin installed).

80 motion is triggered has been detected by the camera. OK Save settings in this tab. Cancel Discard all settings in this tab.

81 3-3-2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3-3-2-1 „General‟ tab All general

82 Scan Time Define the time period to pause between every camera switch when you activate „Scan‟ function. Cycle Recording You can decide the behavi

83 3-3-2-2 „E-Mail Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera

84 Edit Select an email address from „Recipient E-Mail Address‟ box, and click „Edit‟ to edit the email address. Delete Delete selected email addres

85 3-3-2-3 Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll nee

86 Here are the descriptions of all setting items: Item Description Enable Requires password authentication when this software starts. Disable Passw

87 3-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of c

88 Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras

89 Layout style 7: 13 Cameras Displays the video of up to 13 cameras. Layout style 8: 16 Cameras Displays the video of up to

9 1.4 Familiar with Key Components There are two LEDs indicating the camera's status and networking status. LED De

90 3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to

91 3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to

92 3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope

93 3-8 PTZ For cameras that support pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera po

94 3-9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapsho

95 3-10 Recording You can start video recording of selected camera manually by clicking „Start Recording‟ button: When recording starts, yo

96 3-11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the vid

97 Chapter V: How to View IP Camera over the Internet with iPhone IC-3005 series features iPhone support for iPhone users to monitor their home usin

98 DNS account in the http://www.dyndns.org ” In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Ste

99 Configure the Broadband Router based on the following: